Challenger 10 Cheat Sheet and User Manual
Table of Contents
Tecom Challenger V10 Cheat Sheet
Find a list of common tasks that you become almost an everyday task when using the Challenger V10 system.
- Default Installer Code: 4346
- Installer User Number: 50
- How to Change Installer Code: Press Menu -> Installer Code -> 14 Enter -> 3 Enter -> 5o Enter – Enter through Menu until “Pin Code” enter new code
- Installer Menu: Press Menu -> Installer Code -> 19 Enter
- Set Security Password: Press Menu -> Installer Code -> 19 Enter -> 29 Enter -> Enter New Security Password
- Date and Time Menu: Press Menu -> Installer Code -> 15 Enter
- User Menu: Press Menu -> Installer Code -> 14 Enter
- Change “Custom Message” Text on Keypads (LCD RAS): Press Menu -> Installer Code -> 19 Enter -> 26 Enter -> Enter New Custom Message
Common Input Types.
- Secure Alarm – Input Type 2: Alarm triggers only when area is armed.
- Entry Exit No Seal Check – Input Type 13: Allows entry and exit time on the zone and does not check status at arming. Eg. PIR at entry door.
- 24 Hour Alarm – Input Type 5: Alarm triggers at anytime – even when area is disarmed.
- 24 Hour Non Latching Alarm – Input Type 29: Alarm generates anytime. The alarm resets automatically when the input seals.
Challenger 10 System Numbering
Challenger 10 User Menu
Challenger Installer Menu
Loading...
Reload document 
Open in new tab
Challenger User Manual
Loading...