Skip to content Skip to main navigation Skip to footer

How to Change Installer / Program Code on NX / Reliance Panel

To change the installer code on a NX or Reliance alarm system do the following:

  • *8
  • 9713 (Default Installer Code)
  • 0#
  • 1# (Location 1 is the installer code location)
  • 8*4*9*4* (This changes the program code to 8494)
  • Exit

You have now changed the program/installer code.


If you do not know the current program code you will have to default the alarm panel. If this is your only option do your best to get as much information from the client as possible such as user codes and input descriptions.

  1. Default the panel – How to Default a Reliance Alarm Panel

Was This Article Helpful?